90° Short Tube Bend 1.5D 3A

90º Short Tube Bend 1.5D 3A / Everfit Technology CO., LTD. (EFT) is a vacuum component, vacuum fitting, processing equipment and system provider with almost 50 years of experience.

90º Short Tube Bend 1.5D 3A
Send Inquiry

90° Short Tube Bend 1.5D 3A

2WCL

Specification

Nominal Size A Part Number
inch mm. inch mm.
1/2 12.70 1.125 28.60 2407B103
3/4 19.05 1.125 28.60 2407B104
1 25.40 1.500 38.10 2407B105
1 1/2 38.10 2.250 57.20 2407B106
2 50.80 3.000 76.20 2407B107
2 1/2 63.50 3.750 95.30 2407B108
3 76.20 4.500 114.30 2407B109
4 101.60 6.000 152.40 2407B110
6 152.40 9.000 228.60 2407B111
8 203.20 12.000 304.80 2407B112
10 254.00 15.000 381.00 2407B113
12 304.80 18.000 457.20 2407B114

All sizes of clamp end also available

ASME BPE PRODUCT SPECIFICATION

Material
316L, chemical composition in accordance with Table DT-3
304L, 1.4404 and 1.4435 also available

Tolerances
According to ASME BPE-2009 Table DT-5 and Table DT-6

Weld Ends
Weld ends of tubes and fittings are prepared for orbital automatic tube weld

Surface Finish
We provide quality mechanical polish from 32 µ-in through to 15 µ-in.
Electropolishing and other requirements are available upon request.

Test Procedures
Control of dimensions
End preparation
Internal surface roughness measurements
Visual inspection

Product Marking
Besides EVERFIT, we will imprint the part number, heat number,
ASME BPE and surface finish designation

Packaging
All finish products will be packed to suit the special conditions for
international deliveries.

Documentation
Certified material test report 3.1 as per DIN EN 10204/ASTM A1016.
Prematerial certification available upon request

ORDERING INFORMATION : Surface Finish

ASME BPE Ordering Information

Related Products

Best Sale

Vacuum Component | 90° Short Tube Bend 1.5D 3A Manufacturer - EFT

Based in Taiwan, EVERFIT TECHNOLOGY CO., LTD. is a 90° Short Tube Bend 1.5D 3A | vacuum component supplier for various industries, including semi-conductor, pharmaceutical, bio-technology, cosmetics, food processing and structural engineering. Main product: 316Ti Stainless steel pipe, progressing cavity pump part, pipe tee fitting, valve actuator component, diaphragm valve, ferrule, KF flange, etc.

5,500 square meter plant, cleanroom (class 10,000) and ultra-pure water system to deliver the cleanest pipe fittings. Between the robot arm and adjustment of fixture and jig, EFT is moving toward to becoming a manufacturer of pipe fittings with high technology.

EFT has been offering customers high-quality stainless steel vacuum components since 1976, both with advanced technology and 47 years of experience, EFT ensures each customer's demands are met.

Hot Products