Sanitary Ball Valve For Food And Chemical Use With ISO Mount Plate
- Locking device can be required.
- 100% air tested under water at 100psi, open and closed positions.
- Hydrostatic test pressure 1/4"~2" 1,500psi, 2 1/2"~4" 1,200psi.
- Standard End: Weld & Clamp-End:
- Other SMS. DIN. RJT. IDF
- Male/Male can be required.
Designation
| ITEM | PARTS | MATERIAL |
|---|---|---|
| 1 | BODY | ASTM-A351-CF8M |
| 2 | CAP | ASTM-A351-CF8M |
| 3 | BALL | A351-CF8M |
| 4 | SEAT | PTFE |
| 5 | GASKET | PTFE |
| 6 | STEM | ANSI-316 |
| 7 | THRUSTWASHER | PTFE |
| 8 | STEM PACKING | PTFE |
| 9 | BOLT | ANSI-304 |
| 10 | HEX NUT | ANSI-304 |
| 11 | BOLT WASHER | ANSI-304 |
| 12 | GLAND | ANSI-304 |
| 13 | WASHER | ANSI-304 |
| 14 | NUT | ANSI-304 |
| 15 | HANDLE | ANSI-304 |
| 16 | PLASTIC COVER | PLASTIC |
| 17 | LOCK DEVICE | ANSI-304 |
| 18 | STOP PIN | ANSI-304 |
Specification
| Size | DN mm | ISO-5211 mm | C mm | L mm | W mm | Ød mm | ØD mm | R mm | L1 mm |
|---|---|---|---|---|---|---|---|---|---|
| 1/2" | 15 | F03 | 60 | 89 | 132 | 9.5 | 25.4 | 5 | 32.75 |
| 3/4" | 20 | F03 | 64.5 | 101 | 131.5 | 15.8 | 25.4 | 5 | 36.5 |
| 1" | 25 | F04 | 69.2 | 114 | 165 | 22.2 | 50.4 | 6.5 | 40 |
| 1-1/2" | 40 | F05 | 89.26 | 140 | 194.3 | 35 | 50.4 | 8.5 | 43.5 |
| 2" | 50 | F05 | 97.26 | 156 | 194.3 | 47.6 | 63.9 | 8.5 | 45.75 |
| 2-1/2" | 65 | F07 | 126.8 | 197 | 252 | 60.3 | 77.5 | 12 | 56 |
| 3" | 80 | F07 | 135.3 | 229 | 252 | 73 | 90.9 | 12 | 64.5 |
| 4" | 100 | F10 | 158.8 | 242.7 | 332 | 97.4 | 118.9 | 16 | 60.6 |
Mount Actuator For Ball Valve
Ball valve
Mount actuator is the direct mount configuration. It can be equipped low & high bracket. The top of ball valves for greater reliability, easy installation and improved cycling life.
Mount Actuator For Ball Valve
Ball valve
Mount actuator is the direct mount configuration. It can be equipped low & high bracket. The top of ball valves for greater reliability, easy installation and improved cycling life.
Sanitary 3 Way Ball Valve
3 Way Ball valve
SERIES: Y-4HCS FOUR PIECE THREE WAY MULTI-PORT 1000 WOG SANITARY BALL VALVE TRI-CLAMP END T/T/T
Sanitary 3 Way Ball Valve
3 Way Ball valve
SERIES: Y-4HCS FOUR PIECE THREE WAY MULTI-PORT 1000 WOG SANITARY BALL VALVE TRI-CLAMP END T/T/T
2 Way Plug Valves
2 Way Plug Valves
Plug Valve are excellent sanitary devices with minimal pressure drops. This kind of valve is constructed with a special taper which has been carefully designed to reduce wedging and galling. Plug valves are made of type 316 stainless steel and come in the clamp and butt-weld end configuration. Available in rubber or stainless steel plugs. Note: Plug valves, because of inherent design, is recommended only for low pressure applications.... 25 psi maximum; for use with non-hazardous products, and at temperatures not to exceed 100°F. They are subject to leakage almost normal operating, maintenance, and cleaning procedures.
3 Way Plug Valves
3 Way Plug Valves
Plug Valve are excellent sanitary devices with minimal pressure drops. This kind of valve is constructed with a special taper which has been carefully designed to reduce wedging and galling. Plug valves are made of type 316 stainless steel and come in the clamp and butt-weld end configuration. Available in rubber or stainless steel plugs. Note: Plug valves, because of inherent design, is recommended only for low pressure applications.... 25 psi maximum; for use with non-hazardous products, and at temperatures not to exceed 100°F. They are subject to leakage almost normal operating, maintenance, and cleaning procedures.
